Skip to main content

MEC 2014 Notes


Resources:

    Labels:

    Comments

    Post a Comment

    Popular posts from this blog

    "Blinky" TDOA RDF Detector

    Our local Amateur Radio club is building a Radio Direction Finding TDOA (Time Difference of Arrival) detector that has LED's to indicate the direction (Left or right) of the fox.  Here are the build instructions.   (Note: this project was originally presented by NZ1J.  See his video:   https://www.youtube.com/watch?v=mNqUKYkifOo&t=68s   ) Here is the completed project: We start with the schematic:   Note that you either install PIN Diode pairs s D3 and D2, or Diodes pair D1 and D4.   The difference between these is the packaging.  If you are ok with Surface mount, then install D1/D4.  If you want discrete components use D3/D2. Next is the PCB.   The PCB can be ordered using the GRBR files available from the author.  The BOM for the electronic parts is as such: Doppler Direction Finder Bill of Materials   11/12/2021        Qty Part Digi-key Part Numbe...
    5 comments
    Read more

    Radio Direction Finding - TDOA

    This article describes a few projects that I built from plans for Amateur Radio Fox Hunting. Basically, the hobby/sport is for someone to hide a few low power "Foxes", which are small transmitters that beep or send Morse Code, and then have a bunch of HAM's try to find them. The first project that I built was a Yagi Antenna (Directional receiver) and a 4MHZ Offset Attenuator.  The attenuator is needed when you get close to the fox and you need to reduce the power of the received signal.  I struggled with this setup because, on my first 2 fox hunts, there was too much reflection and multi-path interference.  This causes false direction detection and if you are not mentally prepared for this, you want to throw all of your equipment into a garbage can and take up a different hobby.   There are some truly strange individuals who find this frustration fun and enjoy making other people suffer, but I will leave that discussion for another day.  Anyw...
    Post a Comment
    Read more

    Internet Explorer 11 (Windows 8.1) "Google Bug". Back Button hangs IE

    I discovered this week that there is a bug in Google's web page that causes Internet Explorer 11 to hang when you click the back button. The specific scenario is that when you start on Google's web page, and go to a link of some sort, it can trigger this bug when you click back to return to google.  This is fairly well documented on some forums, in that it has been like this for a while, and Google seems unwilling, or unable, to modify their code to not trigger this bug. I do not consider it a IE11 bug as much as I consider it a problem with Google.  Microsoft should of course fix their issue, but also you would think that Google might take this seriously.  To trigger the issue, Go to google.com and search for something that takes you to a Microsoft page.  Example: "Exchange edge server".  Click on the first link and then click on any link on that Microsoft page.  Then click back twice.  The first "back" will work fine because it takes you to the ...
    3 comments
    Read more