Skip to main content

Office365 DIRSYNC, How to Set a Partition to limit the number of objects that are Synced from AD

The default install of DIRSYNC will synchonize your entire AD with Office365.

To my way of thinking, this is excessive and unnecessary.

During the install, at the end of following running Configuration Wizard, you will be asked if you wish to "Synchronize now".   Uncheck this box and then, after a reboot, follow the instructions below:

Step 1:
  • Create a shortcut to C:\Program Files\Windows Azure Active Directory Sync\SYNCBUS\Synchronization Service\UIShell\miiclient.exe (Synchronization Service Manager)
  • Change the advanced properties to Run as Administrator.
  •  Launch this tool
Step 2:
  • After the install,  Open Active Directory Users and Computers and search for all users starting with "MSOL_".  You will see that there is a new account called "MSOL_6b06ffadffb5" or some such giberish.  The number is different on every Server.  
  • Change the password on this account to something secure, that you can enter in the Service Manager
Step 3: 
  • In Synchronization Service Manager, click on the Management Agents button, and highlight Active Directory Connector.
  • Click Actions and then Properties 
  • Click on the "Connect to Active Directory Forest" menu on the left.
  • Enter the Password that you assigned to the default account


  • Click "Configure Directory Partitions".  It will verify the AD credentials and change to the "Configure Directory Partitions" menu.
  • Click on the Containers button

  • Uncheck the select at the root of the Domain, and instead select the appropriate OU(s) that you wish to sync.






 Step 4:
  • Verify DirSync.  Do this by opening up Powershell, and adding the snapin

    ADD-PSSnapin Coexistence-Configuration
  • Type Start-OnlineCoexistenceSync
  • Watch the Status screen of the Synchronization Service Manager 
  •  Make sure that you see "Success" for each of the 4 tasks.



Labels:

Comments

Post a Comment

Popular posts from this blog

"Blinky" TDOA RDF Detector

Our local Amateur Radio club is building a Radio Direction Finding TDOA (Time Difference of Arrival) detector that has LED's to indicate the direction (Left or right) of the fox.  Here are the build instructions.   (Note: this project was originally presented by NZ1J.  See his video:   https://www.youtube.com/watch?v=mNqUKYkifOo&t=68s   ) Here is the completed project: We start with the schematic:   Note that you either install PIN Diode pairs s D3 and D2, or Diodes pair D1 and D4.   The difference between these is the packaging.  If you are ok with Surface mount, then install D1/D4.  If you want discrete components use D3/D2. Next is the PCB.   The PCB can be ordered using the GRBR files available from the author.  The BOM for the electronic parts is as such: Doppler Direction Finder Bill of Materials   11/12/2021        Qty Part Digi-key Part Numbe...
5 comments
Read more

Radio Direction Finding - TDOA

This article describes a few projects that I built from plans for Amateur Radio Fox Hunting. Basically, the hobby/sport is for someone to hide a few low power "Foxes", which are small transmitters that beep or send Morse Code, and then have a bunch of HAM's try to find them. The first project that I built was a Yagi Antenna (Directional receiver) and a 4MHZ Offset Attenuator.  The attenuator is needed when you get close to the fox and you need to reduce the power of the received signal.  I struggled with this setup because, on my first 2 fox hunts, there was too much reflection and multi-path interference.  This causes false direction detection and if you are not mentally prepared for this, you want to throw all of your equipment into a garbage can and take up a different hobby.   There are some truly strange individuals who find this frustration fun and enjoy making other people suffer, but I will leave that discussion for another day.  Anyw...
Post a Comment
Read more

Internet Explorer 11 (Windows 8.1) "Google Bug". Back Button hangs IE

I discovered this week that there is a bug in Google's web page that causes Internet Explorer 11 to hang when you click the back button. The specific scenario is that when you start on Google's web page, and go to a link of some sort, it can trigger this bug when you click back to return to google.  This is fairly well documented on some forums, in that it has been like this for a while, and Google seems unwilling, or unable, to modify their code to not trigger this bug. I do not consider it a IE11 bug as much as I consider it a problem with Google.  Microsoft should of course fix their issue, but also you would think that Google might take this seriously.  To trigger the issue, Go to google.com and search for something that takes you to a Microsoft page.  Example: "Exchange edge server".  Click on the first link and then click on any link on that Microsoft page.  Then click back twice.  The first "back" will work fine because it takes you to the ...
3 comments
Read more